News & Sicurezza

CVE ID :CVE-2026-34956 Published : 5. Mai 2026 15:45 | 36 Minuten ago Description :A flaw was found in Open vSwitch. When Open vSwitch is configured with a conntrack flow using FTP helpers over the userspace datapath, a remote attacker can send a specially crafted FTP stream with an EPASV command exceeding 255 characters. This heap access error can lead to a crash, resulting in a Denial of Service (DoS) for the affected system. Severity: 5.9 | MEDIUM Visit the link for more details, such as CVSS details, affected products, timeline, and more...

China-Aligned SHADOW-EARTH-053 Exploits Exchange Servers to Deploy ShadowPad Malware A China-aligned threat group tracked as SHADOW-EARTH-053 has been exploiting unpatched Microsoft Exchange Server vulnerabilities to conduct cyberespionage against government and defense-linked targets ... Read more Published Date: May 05, 2026 (1 day, 8 hours ago) Vulnerabilities has been mentioned in this article. CVE-2021-27065 CVE-2021-26858 CVE-2021-26857 CVE-2021-26855

CVE ID :CVE-2026-43073 Published : May 5, 2026, 4:16 p.m. | 2 hours, 5 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: x86-64: rename misleadingly named '__copy_user_nocache()' function This function was a masterclass in bad naming, for various historical reasons. It claimed to be a non-cached user copy. It is literally _neither_ of those things. It's a specialty memory copy routine that uses non-temporal stores for the destination (but not the source), and that does exception handling for both source and destination accesses. Also note that while it works for unaligned targets, any unaligned parts (whether at beginning or end) will not use non-temporal stores, since only words and quadwords can be non-temporal on x86. The exception handling means that it _can_ be used for user space accesses, but not on its own - it needs all the normal "start user space access" logic around it. But typically the user space access would be the source, not the non-temporal destination. That was the original intention of this, where the destination was some fragile persistent memory target that needed non-temporal stores in order to catch machine check exceptions synchronously and deal with them gracefully. Thus that non-descriptive name: one use case was to copy from user space into a non-cached kernel buffer. However, the existing users are a mix of that intended use-case, and a couple of random drivers that just did this as a performance tweak. Some of those random drivers then actively misused the user copying version (with STAC/CLAC and all) to do kernel copies without ever even caring about the exception handling, _just_ for the non-temporal destination. Rename it as a first small step to actually make it halfway sane, and change the prototype to be more normal: it doesn't take a user pointer unless the caller has done the proper conversion, and the argument size is the full size_t (it still won't actually copy more than 4GB in on...

CVE ID :CVE-2026-43071 Published : May 5, 2026, 4:16 p.m. | 2 hours, 5 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: dcache: Limit the minimal number of bucket to two There is an OOB read problem on dentry_hashtable when user sets 'dhash_entries=1': BUG: unable to handle page fault for address: ffff888b30b774b0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP PTI RIP: 0010:__d_lookup+0x56/0x120 Call Trace: d_lookup.cold+0x16/0x5d lookup_dcache+0x27/0xf0 lookup_one_qstr_excl+0x2a/0x180 start_dirop+0x55/0xa0 simple_start_creating+0x8d/0xa0 debugfs_start_creating+0x8c/0x180 debugfs_create_dir+0x1d/0x1c0 pinctrl_init+0x6d/0x140 do_one_initcall+0x6d/0x3d0 kernel_init_freeable+0x39f/0x460 kernel_init+0x2a/0x260 There will be only one bucket in dentry_hashtable when dhash_entries is set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then, following process will access more than one buckets(which memory region is not allocated) in dentry_hashtable: d_lookup b = d_hash(hash) dentry_hashtable + ((u32)hashlen >> d_hash_shift) // The C standard defines the behavior of right shift amounts // exceeding the bit width of the operand as undefined. The // result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen', // so 'b' will point to an unallocated memory region. hlist_bl_for_each_entry_rcu(b) hlist_bl_first_rcu(head) h->first // read OOB! Fix it by limiting the minimal number of dentry_hashtable bucket to two, so that 'd_hash_shift' won't exceeds the bit width of type u32. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43072 Published : May 5, 2026, 4:16 p.m. | 2 hours, 5 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: drm/vc4: platform_get_irq_byname() returns an int platform_get_irq_byname() will return a negative value if an error happens, so it should be checked and not just passed directly into devm_request_threaded_irq() hoping all will be ok. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2025-61669 Published : 5. Mai 2026 15:28 | 53 Minuten ago Description :Jupyter Server is the backend for Jupyter web applications. In jupyter_server versions through 2.17.0, the next query parameter in the login flow is insufficiently validated in `LoginFormHandler._redirect_safe()`, which allows redirects to arbitrary external domains via values such as `///example.com`. An attacker can use a crafted login URL to redirect users to a malicious site and facilitate phishing attacks. This issue is fixed in version 2.18.0. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43069 Published : May 5, 2026, 4:16 p.m. | 2 hours, 5 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ll: Fix firmware leak on error path Smatch reports: drivers/bluetooth/hci_ll.c:587 download_firmware() warn: 'fw' from request_firmware() not released on lines: 544. In download_firmware(), if request_firmware() succeeds but the returned firmware content is invalid (no data or zero size), the function returns without releasing the firmware, resulting in a resource leak. Fix this by calling release_firmware() before returning when request_firmware() succeeded but the firmware content is invalid. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43070 Published : May 5, 2026, 4:16 p.m. | 2 hours, 5 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register ID for BPF_END value tracking When a register undergoes a BPF_END (byte swap) operation, its scalar value is mutated in-place. If this register previously shared a scalar ID with another register (e.g., after an `r1 = r0` assignment), this tie must be broken. Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END. Consequently, if a conditional jump checks the swapped register, the verifier incorrectly propagates the learned bounds to the linked register, leading to false confidence in the linked register's value and potentially allowing out-of-bounds memory accesses. Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case to break the scalar tie, similar to how BPF_NEG handles it via `__mark_reg_known`. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43068 Published : 5. Mai 2026 15:23 | 58 Minuten ago Description :In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal() There's issue as follows: ... EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): error count since last fsck: 1 EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760 EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760 ... According to the log analysis, blocks are always requested from the corrupted block group. This may happen as follows: ext4_mb_find_by_goal ext4_mb_load_buddy ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_wait_block_bitmap ext4_validate_block_bitmap if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp)) return -EFSCORRUPTED; // There's no logs. if (err) return err; // Will return error ext4_loc...

CVE ID :CVE-2026-43067 Published : 5. Mai 2026 15:23 | 58 Minuten ago Description :In the Linux kernel, the following vulnerability has been resolved: ext4: handle wraparound when searching for blocks for indirect mapped blocks Commit 4865c768b563 ("ext4: always allocate blocks only from groups inode can use") restricts what blocks will be allocated for indirect block based files to block numbers that fit within 32-bit block numbers. However, when using a review bot running on the latest Gemini LLM to check this commit when backporting into an LTS based kernel, it raised this concern: If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal group was populated via stream allocation from s_mb_last_groups), then start will be >= ngroups. Does this allow allocating blocks beyond the 32-bit limit for indirect block mapped files? The commit message mentions that ext4_mb_scan_groups_linear() takes care to not select unsupported groups. However, its loop uses group = *start, and the very first iteration will call ext4_mb_scan_group() with this unsupported group because next_linear_group() is only called at the end of the iteration. After reviewing the code paths involved and considering the LLM review, I determined that this can happen when there is a file system where some files/directories are extent-mapped and others are indirect-block mapped. To address this, add a safety clamp in ext4_mb_scan_groups(). Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43065 Published : 5. Mai 2026 15:23 | 58 Minuten ago Description :In the Linux kernel, the following vulnerability has been resolved: ext4: always drain queued discard work in ext4_mb_release() While reviewing recent ext4 patch[1], Sashiko raised the following concern[2]: > If the filesystem is initially mounted with the discard option, > deleting files will populate sbi->s_discard_list and queue > s_discard_work. If it is then remounted with nodiscard, the > EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is > neither cancelled nor flushed. [1] https://lore.kernel.org/r/[email protected]/ [2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev The concern was valid, but it had nothing to do with the patch[1]. One of the problems with Sashiko in its current (early) form is that it will detect pre-existing issues and report it as a problem with the patch that it is reviewing. In practice, it would be hard to hit deliberately (unless you are a malicious syzkaller fuzzer), since it would involve mounting the file system with -o discard, and then deleting a large number of files, remounting the file system with -o nodiscard, and then immediately unmounting the file system before the queued discard work has a change to drain on its own. Fix it because it's a real bug, and to avoid Sashiko from raising this concern when analyzing future patches to mballoc.c. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43066 Published : 5. Mai 2026 15:23 | 58 Minuten ago Description :In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths During code review, Joseph found that ext4_fc_replay_inode() calls ext4_get_fc_inode_loc() to get the inode location, which holds a reference to iloc.bh that must be released via brelse(). However, several error paths jump to the 'out' label without releasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failure Fix this by introducing an 'out_brelse' label placed just before the existing 'out' label to ensure iloc.bh is always released. Additionally, make ext4_fc_replay_inode() propagate errors properly instead of always returning 0. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...