News & Sicurezza

CVE ID :CVE-2026-43348 Published : May 8, 2026, 1:41 p.m. | 44 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel computes pgmap->vmemmap_shift as the number of trailing zeros in the OR of start_pfn and last_pfn, intending to use the largest compound page order both endpoints are aligned to. However, this value is not clamped to MAX_FOLIO_ORDER, so a sufficiently aligned range (e.g. physical range [0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000 with 35 trailing zeros) can produce a shift larger than what memremap_pages() accepts, triggering a WARN and returning -EINVAL: WARNING: ... memremap_pages+0x512/0x650 requested folio size unsupported The MAX_FOLIO_ORDER check was added by commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound page sizes in memremap_pages()"). Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always request the largest order the kernel supports, in those cases, rather than an out-of-range value. Also fix the error path to propagate the actual error code from devm_memremap_pages() instead of hard-coding -EFAULT, which was masking the real -EINVAL return. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43347 Published : May 8, 2026, 1:39 p.m. | 46 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: monaco: Reserve full Gunyah metadata region We observe spurious "Synchronous External Abort" exceptions (ESR=0x96000010) and kernel crashes on Monaco-based platforms. These faults are caused by the kernel inadvertently accessing hypervisor-owned memory that is not properly marked as reserved. >From boot log, The Qualcomm hypervisor reports the memory range at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned: qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0 However, the EFI memory map provided by firmware only reserves the subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion (0x91a88000–0x91afffff) is incorrectly reported as conventional memory (from efi debug): efi: 0x000091a40000-0x000091a87fff [Reserved...] efi: 0x000091a88000-0x0000938fffff [Conventional...] As a result, the allocator may hand out PFNs inside the hypervisor owned region, causing fatal aborts when the kernel accesses those addresses. Add a reserved-memory carveout for the Gunyah hypervisor metadata at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not map or allocate from this area. For the record: Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC) UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1 Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43346 Published : May 8, 2026, 1:39 p.m. | 46 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: ice: ptp: don't WARN when controlling PF is unavailable In VFIO passthrough setups, it is possible to pass through only a PF which doesn't own the source timer. In that case the PTP controlling PF (adapter->ctrl_pf) is never initialized in the VM, so ice_get_ctrl_ptp() returns NULL and triggers WARN_ON() in ice_ptp_setup_pf(). Since this is an expected behavior in that configuration, replace WARN_ON() with an informational message and return -EOPNOTSUPP. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43345 Published : May 8, 2026, 1:39 p.m. | 46 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix event ring index not programmed for IPA v5.0+ For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to CH_C_CNTXT_1. The v5.0 register definition intended to define this field in the CH_C_CNTXT_1 fmask array but used the old identifier of ERINDEX instead of CH_ERINDEX. Without a valid event ring, GSI channels could never signal transfer completions. This caused gsi_channel_trans_quiesce() to block forever in wait_for_completion(). At least for IPA v5.2 this resolves an issue seen where runtime suspend, system suspend, and remoteproc stop all hanged forever. It also meant the IPA data path was completely non functional. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43344 Published : May 8, 2026, 1:39 p.m. | 46 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using uncore_pcibus_to_dieid(), which retrieves topology from the UBOX GIDNIDMAP register and works regardless of whether NUMA is enabled in Linux. This requires snbep_pci2phy_map_init() to be added in spr_uncore_pci_init(). Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where NUMA is expected to be enabled. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-44340 Published : May 8, 2026, 1:38 p.m. | 47 minutes ago Description :PraisonAI is a multi-agent teams system. Prior to version 4.6.37, the _safe_extractall helper that all recipe pull, recipe publish, and recipe unpack flows route through validates each archive member's name for absolute paths, .. segments, and resolved-path escape — but does not validate member.linkname, does not reject symlink/hardlink members, and calls tar.extractall(dest_dir) without filter="data". A bundle that contains a symlink with a name inside dest_dir but a linkname pointing outside it, followed by a regular file whose path traverses through the just-created symlink, escapes dest_dir and lets the attacker write arbitrary content to an attacker-chosen location on the victim's filesystem. This issue has been patched in version 4.6.37. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-39816 Published : May 8, 2026, 1:38 p.m. | 47 minutes ago Description :The optional extension component TinkerpopClientService is missing the Restricted annotation with the Execute Code Required Permission in Apache NiFi 2.0.0-M1 through 2.8.0. The TinkerpopClientService supports configuration of ByteCode Submission for the Script Submission Type, enabling Groovy Script execution in the service prior to submitting the query. The missing Restricted annotation allows users without the Execute Code Permission to configure the Service in installations that use fine-grained authorization and have the optional TinkerpopClientService installed. Apache NiFi installations that do not have the nifi-other-graph-services-nar installed are not subject to this vulnerability. Upgrading to Apache NiFi 2.9.0 is the recommended mitigation. Severity: 7.5 | HIGH Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43343 Published : May 8, 2026, 1:37 p.m. | 48 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix unbalanced refcnt in geth_free geth_alloc() increments the reference count, but geth_free() fails to decrement it. This prevents the configuration of attributes via configfs after unlinking the function. Decrement the reference count in geth_free() to ensure proper cleanup. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43342 Published : May 8, 2026, 1:37 p.m. | 48 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43341 Published : May 8, 2026, 1:37 p.m. | 48 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: net/ipv6: ioam6: prevent schema length wraparound in trace fill ioam6_fill_trace_data() stores the schema contribution to the trace length in a u8. With bit 22 enabled and the largest schema payload, sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the remaining-space check. __ioam6_fill_trace_data() then positions the write cursor without reserving the schema area but still copies the 4-byte schema header and the full schema payload, overrunning the trace buffer. Keep sclen in an unsigned int so the remaining-space check and the write cursor calculation both see the full schema length. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-43340 Published : May 8, 2026, 1:37 p.m. | 48 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: comedi: Reinit dev->spinlock between attachments to low-level drivers `struct comedi_device` is the main controlling structure for a COMEDI device created by the COMEDI subsystem. It contains a member `spinlock` containing a spin-lock that is initialized by the COMEDI subsystem, but is reserved for use by a low-level driver attached to the COMEDI device (at least since commit 25436dc9d84f ("Staging: comedi: remove RT code")). Some COMEDI devices (those created on initialization of the COMEDI subsystem when the "comedi.comedi_num_legacy_minors" parameter is non-zero) can be attached to different low-level drivers over their lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in inconsistent lock states being reported when there is a mismatch in the spin-lock locking levels used by each low-level driver to which the COMEDI device has been attached. Fix it by reinitializing `dev->spinlock` before calling the low-level driver's `attach` function pointer if `CONFIG_LOCKDEP` is enabled. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-44339 Published : May 8, 2026, 1:37 p.m. | 49 minutes ago Description :PraisonAI is a multi-agent teams system. Prior to praisonai version 4.6.37 and praisonaiagents version 1.6.37, praisonaiagents resolves unresolved tool names against module globals and __main__ after it fails to match the declared tool list and the registry. With the default agent configuration, _perm_allow is None, so undeclared non-dangerous tool names are not rejected by the permission gate. An attacker who can influence tool-call names can therefore invoke unintended application callables that were never declared as tools. This issue has been patched in praisonai version 4.6.37 and praisonaiagents version 1.6.37. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...