News & Sicurezza

CVE ID :CVE-2026-80714 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: ipvs: do not propagate one-packet flag to synced conns Synced connections can be created before their destination exists. When the destination is later added, ip_vs_bind_dest() copies connection flags from the destination into cp->flags. IP_VS_CONN_F_ONE_PACKET connections are not synced. If a synced connection inherits IP_VS_CONN_F_ONE_PACKET while it is already hashed, expiry can treat it as a one-packet connection and skip unlinking the existing conn_tab node, leaving stale hash nodes pointing at a freed struct ip_vs_conn. Drop IP_VS_CONN_F_ONE_PACKET from destination flags when binding synced connections. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80715 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: igc: remove napi_synchronize() in igc_down() When an AF_XDP zero-copy application is killed abruptly, the XSK pool is torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the full budget on every poll, so napi_complete_done() never clears NAPI_STATE_SCHED. igc_down() calls napi_synchronize() before napi_disable(), so it spins forever waiting for that bit and the interface never goes down. Drop the napi_synchronize() and let napi_disable() do the job -- it sets NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after polling has stopped, matching the recent igb fix b1e067240379. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80713 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: io_uring: preserve task restrictions across exec Per-task restrictions apply to all rings created by a task. Once installed, they should not be dropped across exec. For a task that has used io_uring, the exec cancellation path calls __io_uring_free(). This frees both the task context and the per-task restriction, so a ring created after exec is unrestricted. Split task context cleanup into io_uring_free_tctx(), and use it from the exec cancellation path. Keep __io_uring_free() for final task cleanup, where both the context and restriction are released. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80712 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: spi: spi-qpic-snand: write the feature value before executing SET_FEATURE qcom_spi_send_cmdaddr() programs NAND_FLASH_CMD/NAND_EXEC_CMD and submits the descriptors, which makes the controller execute the command immediately. For SPINAND_SET_FEATURE the value to be written is only placed into NAND_FLASH_FEATURES afterwards, by qcom_spi_io_op(), in a second submission - so the chip is programmed with whatever that register happened to hold from a previous operation, and the intended value is only applied by the *next* SET_FEATURE. Measured on a TP-Link Archer AX55 v1 (IPQ5018, ESMT F50L1G41LB): writing 0x40 to the configuration register (0xb0) leaves the chip at 0x00, and the subsequent write of 0x00 leaves it at 0x40 - every write lands one operation late. This stayed unnoticed until v6.18 added SPI-NAND OTP support together with OTP entries for ESMT chips. spinand_otp_rw() enables OTP mode, reads, and disables it again, and mtd_otp_nvmem_add() does this during MTD registration. With the off-by-one, the "disable" write actually applies the previously requested value, so CFG_OTP_ENABLE ends up set: the chip stays in OTP mode, every subsequent array read returns the OTP area instead of the array (UBI reports an empty device) and all writes fail with -EIO because the OTP area is write protected. On this board that makes the whole flash unusable and the device unbootable. Write the feature value into NAND_FLASH_FEATURES as part of the same transaction, before NAND_EXEC_CMD. While at it, copy only the bytes the operation actually carries - the previous code dereferenced a 4-byte pointer on a one-byte buffer (spinand->scratchbuf). With this patch the flash contents read back bit-identical to a known-good dump of the same board taken under the vendor firmware (md5-verified across partitions), and writes work...

CVE ID :CVE-2026-80711 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: handle missing status supplier MAX17040 does not report charger state itself, so the driver forwards POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is registered, power_supply_get_property_from_supplier() returns -ENODEV and leaves the output value untouched. max17040_get_property() currently ignores that error and returns success, so userspace can read an uninitialized status value from the battery power supply. This happens on systems that use the fuel gauge without a charger supplier relationship in firmware. Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and propagate other supplier lookup errors. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80710 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix undersized format-check buffer fmt_buffer_size in dasd_eckd_check_device_format() is declared as int, even though one of the multiplicands, sizeof(struct eckd_count), is a size_t. The expression trkcount * rpt_max * sizeof(struct eckd_count) is therefore correctly evaluated at 64-bit width, but the result is silently truncated when it is stored back into the 32-bit fmt_buffer_size variable. For a sufficiently large track range (start_unit/stop_unit are caller-controlled) this truncation yields a buffer size far smaller than the number of tracks actually requested. kzalloc() then succeeds with an undersized allocation, while the subsequent channel program build still operates on the untruncated track count and writes past the end of that buffer. Compute the buffer size with check_mul_overflow() and keep it in a size_t, so that a value that no longer fits results in -EINVAL instead of a silently truncated allocation size. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80709 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs There is a wrong upper limit check for the domain value when an EP11 CPRB is processed for sending to a crypto card. This check is only active on custom device nodes but may lead to access heap memory behind perms->adm when an administrative CPRB is sent. Add correct limit (AP_DOMAINS = 256) checking to fix this. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80707 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer Zero the allocated buffer in j1939_session_fresh_new() to ensure it contains no residual data. While there is a potential performance impact if users allocate maximum sized ETP buffers, most real-world use cases are not noticeably affected since the maximum known buffer size is typically around 65K. [mkl: add Message-ID] Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80708 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey() The helper function _ip_cprb_helper() uses internal buffer memory for building and processing CPRBs. After use this buffer was never scrubbed which could lead to leaving for example clear key material in memory which could be exposed via tricky reuse of this same memory. Extend the _ip_cprb_helper() function with another parameter 'scrub' used to steer scrubbing of this buffer. So now the caller has the opportunity to decide if scrubbing is needed or not. Extend the clear key to secure key token import process in function cca_clr2cipherkey() to tell the helper function from above to scrub the cprb buffer when the clear key value is part of the request data. Add explicit scrubbing on return from function cca_clr2cipherkey() for the random EXOR buffer and the cprb buffer. Overall this cleans the internal used buffer in case of clear key import to prevent sensitive data to get exposed. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80706 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: can: softing: fw_parse(): validate firmware record spans fw_parse() reads a fixed record header, a firmware-provided payload, and a trailing checksum without knowing the end of the firmware blob. A truncated record can therefore make those reads exceed the blob. The same record also supplies addresses and lengths for writes into DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its bounds check, while the application loader does not bound the staging copy at all. Pass the firmware end to the parser and validate the full source record. Use a signed wide offset for generic DPRAM records and validate the application staging span against the mapped DPRAM before copying. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80705 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check if dml21_add_phantom_plane() is successful Verify that the phantom plane was allocated to avoid a later segfault. (cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f) Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80704 Published : Aug. 28, 2026, 8:16 a.m. | 1 hour, 51 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use proper context for logging The same as the rest of the code, get_ss_info_from_atombios() uses calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is initialized only later in calc_pll_max_vco_construct(). Therefore, any output using DC_LOG_SYNC() leads to a NULL pointer deference in get_ss_info_from_atombios(). According to Sashiko, the very same problem exists in dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too. To avoid accessing the NULL context, use clk_src->base.ctx->logger everywhere. That context in base is initialized earlier in dce110_clk_src_construct() and dce112_clk_src_construct(). Before get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions above are actually called. This is done by redefining DC_LOGGER to CTX->logger. Before: dce110_clk_src_construct() did: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() ctx # BOOM -> calc_pll_max_vco_construct() ctx After: dce110_clk_src_construct() does: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() base.ctx (cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0) Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...