News & Sicurezza

CVE ID :CVE-2026-80920 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: io_uring: defer eventfd signaling when queued from a wakeup handler io_req_local_work_add() signals the CQ ring eventfd inline when it is the one to push the first entry onto ->work_list. For DEFER_TASKRUN rings that add is frequently done from a waitqueue wakeup handler, where an arbitrary waitqueue lock is held. eventfd_signal_mask() only refuses to recurse when current->in_eventfd is set, but that bit is set by eventfd_signal_mask() itself. If the wake chain starts somewhere else, signal goes out inline and can feed back into epoll. Add IOU_F_TWQ_IN_WAKE, set it on the task_work add done from the three waitqueue callbacks, and use it to force io_eventfd_signal() down the existing call_rcu_hurry() deferral instead of signaling inline. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80921 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: KVM: s390: vsie: zero stale crypto bits When shadowing crypto access bits from a format0 apcb (crycb 0 or 1), the bits 64..255 are unchanged from whatever is in the vsie page in the crycb and thus in the apcb. This gives a nested guest potential access to a device no longer available. Zero out the remaining bits. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80922 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: crypto: qcom-rng - Allow zero as a random number Zero is a valid random number and needs to be allowed. Otherwise the output is distinguishable from random. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80923 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: xhci: dbgtty: Fix unregister on tty_register_driver() failure If tty_register_driver() fails, it drops the reference, but fails to set the global dbc_tty_driver to NULL, causing the unregister to be called again when module exits. On module unload dbc_tty_exit() only gates its cleanup on the driver pointer being non-NULL, so it operates on the already-freed driver: module_init(xhci_hcd_init) xhci_hcd_init() xhci_dbc_init() [return value ignored] dbc_tty_init() tty_register_driver() fails tty_driver_kref_put() -> driver freed (dbc_tty_driver left dangling) ... module_exit(xhci_hcd_fini) xhci_hcd_fini() xhci_dbc_exit() dbc_tty_exit() if (dbc_tty_driver) -> true (dangling) tty_unregister_driver() -> use-after-free Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80925 Published : Sept. 9, 2026, 5:17 p.m. | 2 hours, 18 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: vlan: fix skb_under_panic and races when toggling HW VLAN offload Toggling hardware VLAN TX offload (NETIF_F_HW_VLAN_CTAG_TX or NETIF_F_HW_VLAN_STAG_TX) on a lower device invokes vlan_transfer_features(), which dynamically changed vlandev->hard_header_len. This causes two issues: 1. Lockless TX paths (e.g. packet_snd in af_packet.c, ip6_finish_output2) read dev->hard_header_len without holding RTNL lock. Mutating hard_header_len dynamically under RTNL creates a data race where upper layers reserve insufficient headroom based on a stale hard_header_len, resulting in skb_under_panic when vlan_dev_hard_header() is called. 2. In addition, vlan_transfer_features() updated hard_header_len without updating header_ops, causing a mismatch between allocated headroom and header creation. Always setting dev->hard_header_len = real_dev->hard_header_len and dev->needed_headroom = real_dev->needed_headroom + VLAN_HLEN unconditionally ensures: - dev->hard_header_len remains 100% static and immutable at real_dev->hard_header_len, eliminating all dynamic runtime updates and data races on hard_header_len. - Upper layers allocating skbs via LL_RESERVED_SPACE() will always reserve sufficient headroom for software VLAN tag insertion (real_dev->hard_header_len + real_dev->needed_headroom + VLAN_HLEN). - vlandev inherits real_dev->needed_tailroom so underlying trailer/padding/ICV requirements are honored. - AF_PACKET SOCK_RAW network header offsets remain correctly aligned at real_dev->hard_header_len. - vlan_header_ops is used unconditionally. Note to stable teams: Make sure to backport these commits: e16e960d55a4 ("ipvlan: inherit needed_headroom and needed_tailroom from phy_dev") cef51860becd ("macvlan: inherit needed_headroom and needed_tailroom from lowerdev") Severity: 0.0 | NA Visit the link for more details, such a...

CVE ID :CVE-2026-80915 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix DPT allocation paths. Remove the fallback for VRAM to system memory, I tested it and that doesn't work at all, only a black screen with pipe fault errors were observed. On systems with media GT, extra latency is added when accessing stolen memory when the GT is in MC6. Since we additionally aren't counting how much memory is used for stolen and we could in theory fill up the entire stolen area with DPT's, avoid using stolen and only use the default memory region. Using stolen may also result in random system hangs under load. (cherry picked from commit a196406a3831291598fe8e73245914f7acffdfe0) Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80918 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: HID: core: fix number/pointer type confusion on long items When fetch_item() is called by hid_scan_report() on an item with HID_ITEM_TAG_LONG, it stores a pointer to the item data in item->data.longdata instead of storing a value directly in item->data.{u8/u16/u32}. When item_udata() or item_sdata() encounters such an item, it incorrectly assumes that the item is in short format, and therefore returns the lower part of a kernel pointer reinterpreted as a number. When a HID device is connected whose descriptor contains a HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this causes the lower half of a kernel pointer to be printed into dmesg as a number, like this: hid (null): invalid report_size 107953555 To fix it, let item_udata() and item_sdata() verify that the item is in short format. Note that this bug only affects hid_scan_report(), while the main parsing pass hid_parse_collections() will always bail out when encountering a long item. Sidenote: There are currently no users of data.longdata; maybe we should just remove any parsing of long-format descriptors as a follow-up. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80917 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems On 32-bit systems the config space is too large to ioremap in one go, so pci_ecam_create() maps each bus segment separately and relies on the ->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for every config access. The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c do not. As a result, on a 32-bit host using "pci-host-cam-generic" the per-bus mapping is never set up and the first config read dereferences a NULL base, crashing during bus enumeration: Unable to handle kernel NULL pointer dereference at virtual address 00000800 Oops [#1] CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43 Hardware name: Digilent Nexys-Video-A7 RV32 (DT) epc : pci_generic_config_read+0x40/0xb0 ra : pci_generic_config_read+0x2c/0xb0 [] pci_generic_config_read+0x40/0xb0 [] pci_bus_read_config_dword+0x50/0xb0 [] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec [] pci_scan_single_device+0xa4/0x11c [] pci_scan_slot+0x9c/0x23c [] pci_scan_child_bus_extend+0x58/0x2f4 [] pci_scan_root_bus_bridge+0x64/0xe8 [] pci_host_probe+0x20/0xc8 [] pci_host_common_probe+0x144/0x1e4 Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks. Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c, move the CAM ops definition there as pci_generic_cam_ops (mirroring pci_generic_ecam_ops) and export it for pci-host-generic.c to reference. [mani: removed timestamp from log] Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-80916 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: kcov: fix data corruption and race conditions on PREEMPT_RT syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the temporary storage used for saving/restoring remote KCOV state is currently allocated as the per-CPU area. On PREEMPT_RT kernels, softirq handlers run as preemptible task threads (e.g., ksoftirqd). If a softirq context preempts a task running a remote KCOV session, it safely saves the task's state into the per-CPU area. However, if that softirq thread is subsequently preempted by a higher- priority softirq thread on the same CPU, the second softirq will overwrite the same per-CPU area, permanently destroying the original task's KCOV state. Fix this data corruption by moving the temporary storage from the per-CPU area to the per-thread area. Since each softirq thread now owns its own task context, nested softirq preemption no longer causes data overwrites. Note that while the temporary storage is now on a per-thread basis, the per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that kcov_remote_start() and kcov_remote_stop() operate atomically without racing against asynchronous interrupts that manipulate the current task's KCOV state. It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init() has already called panic() before returning NULL, for there will be no OOM-killable userspace processes when __init function of built-in module runs. But this patch also fixes crashing the kernel when vmalloc_node() in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in (1) doing vmalloc() in kcov_remote_start() despite !in_task() context (2) out-of-array-bounds access if (1) succeeded but kcov->remote_size Severity: 0.0 | NA Visit the link for more details, such as...

CVE ID :CVE-2026-80914 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready iso_conn_ready() looks up the BIS listener socket with iso_get_sock(), which takes a reference, and then, without re-checking its state, creates a child socket from it: parent = iso_get_sock(hdev, ...); if (!parent) return; lock_sock(parent); sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...); ... iso_chan_add(conn, sk, parent); ... release_sock(parent); sock_put(parent); If the listener socket is closed concurrently, between iso_get_sock() and lock_sock(), the reference taken by iso_get_sock() may be the last one: the close path drops the link-list reference, and once iso_conn_ready() drops its own reference at the end of the function the socket is freed. The child socket, however, is already linked to the freed parent, and a later disconnect of the child runs iso_chan_del() -> bt_accept_unlink(), which dereferences the dangling parent pointer into the freed accept queue (a use-after-free). The same dangling pointer is also dereferenced through parent->***() in iso_chan_del(). Fix it the same way the connected (non-BIS) path was fixed in commit 0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"): after taking the socket lock, re-check that the parent is still a listening, alive socket, and bail out otherwise. Severity: 0.0 | NA Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-77120 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could cause privilege escalation to root and unauthorized execution of administrative functions when an authenticated user with SSH enabled interacts with the operating system console that improperly processes user-controlled input. Severity: 8.7 | HIGH Visit the link for more details, such as CVSS details, affected products, timeline, and more...

CVE ID :CVE-2026-70425 Published : Sept. 9, 2026, 5:17 p.m. | 18 minutes ago Description :Dell PowerScale OneFS, Versions 9.5.0.0 through 9.7.1.0, Versions 9.8.0.0 through 9.10.1.0, and Versions 9.11.0.0 through 9.14.0.1, contain a command injection vulnerability. An admin privileged local attacker could potentially exploit this vulnerability, leading to elevation of privileges to root, impacting confidentiality, integrity, and availability. Severity: 6.7 | MEDIUM Visit the link for more details, such as CVSS details, affected products, timeline, and more...